Re-use of this resource is governed by a Creative Commons
Attribution-
Noncommercial-Share Alike 2.0 Licence UK: England & Wales
https://creativecommons.org/licenses/by-nc-sa/2.0/uk/
Noncommercial-Share Alike 2.0 Licence UK: England & Wales
https://creativecommons.org/licenses/by-nc-sa/2.0/uk/
Ex
k
θ Constituents
f%
1
Epoxy
SiC
2
Epoxy
SiC
3
Epoxy
SiC
4
Epoxy
SiC
5
Epoxy
SiC
1. Construct your own laminate by selecting the fibres
and matrices using the above drop-down menus,
2. Repeat 1 to build up a number of plies (k), fibre orientations (θ) and
fibre volume fractions (f)
3. Calculate the elastic constants Ex, Gxy and νxy for
different loading angles.
Recommended stacking sequences: i) 0
ii) 0 / 90
iii) 0/45/90/-45.
Ply angles must be in the range +90° to -90
and matrices using the above drop-down menus,
2. Repeat 1 to build up a number of plies (k), fibre orientations (θ) and
fibre volume fractions (f)
3. Calculate the elastic constants Ex, Gxy and νxy for
different loading angles.
Recommended stacking sequences: i) 0
ii) 0 / 90
iii) 0/45/90/-45.
Ply angles must be in the range +90° to -90
Ply angles must be in the range +90° to -90